Dump Load for 12v, 24v, 48v Wind Turbine

RRP: £110.00 you save £11.00   £99.00   Buy Now

***Free Delivery on orders over £75***
Dump Load for 12v/24v/48v Wind Turbine

For use with either of the Xantrex charge controllers (see our listings), these dump loads are effectively very high power (1KW@24V) air heating elements. The C40 and C60 charge controllers are used in 'Load Diversion' mode, and as such, they dissipate any unwanted power into these dump loads when your battery bank becomes fully charged. It is vital to use a charge controller to prevent damage to your batteries, especially if you leave your system unattended for long periods of time, and without loading your batteries with an inverter, or other suitable device.

These dump loads should be mounted as close as possible to your C40 or C60 charge controller. They should be mounted in free circulating air, and not in an enclosed space. The power connection blocks are made of solid brass, and all cabling used should be securely connected using the bolts provided. Please ensure that you choose the correct number of dump loads for the battery bank voltage you are charging. See below for details.

The following number of dump loads are required with each of the following battery voltages.

* For 12V systems use only the C60 charge controller and 2 Dump Loads (in parallel)
* For 24V systems use only the C60 charge controller and 1 Dump Load
* For 48V systems use only a C40 charge controller and 2 Dump Loads (in series)

Postage charges will be reduced when you purchase other FuturEnergy products from us. Please see our other listings.

Brand New / Boxed

Kaieteur are proud to donate a percentage of sales into a tree planting fund which aids local and international tree planting projects.