Wind Turbine Tower Kit 7.5m

Especially suitable for the Future Energy 1Kw Wind Turbine.



Designed specifically to compliment Small Scale Wind Turbines in the 1KW power range, these tower kits offer a simple, substantial and effective way to mount your turbine on your site. The 'sectional' design allows both Installers and the DIY enthusiast to install up to a 1KW turbine in any suitable location, with a minimum of additional materials and tools.

The completed tower height is 7.5m, and is constructed from 3 x 2.5m sections of 48.3mm galvanised tube lengths. Each tower 'tube' is interconnected by a simple joining section, allowing the tower to be built easily, without the use of specialist equipment or concrete. (except in poor ground condition areas). For additional tower stability, you can purchase a second set of guy wires, which attach to the midpoint of the tower, if required. Please note, you may wish to use the optional Gin Pole to help to erect your tower, but this is not essential.

The guy anchors and main tower base, and all other parts, are galvanised for complete weather protection, and are fabricated using 'heavy grade' steel, to minimise the risk of failure. All towers are guaranteed against defect and mechanical failure for 12 months. The tower base and guy anchors can be 'driven' into firm ground, and will provide suitable tower security when installed as instructed. For additional safety, and for installation on unsuitable ground, it is recommended that these parts are 'concreted' into place. For this reason, the kits all contain additional 'reinforcing bars' for use in concrete foundations.



For any Further questions please phone 01395 515561 or Email info@kaieteur (Then add .uk.com)