Future Energy 48v 1KW Wind Turbine

RRP: £895.00 you save £100.00   £795.00   Buy Now

48V Wind Turbine for Your Home

***Includes FREE UK delivery***
***Please inquire for deliveries outside the UK***

Your turbine will be supplied in 2 shipping containers, weighing a total of 27Kgs, and you will be required to attach the tailfin and blades to the main turbine housing. All instructions will be supplied to guide you through the simple assembly, and you should be ready to mount and use your turbine in only a few hours.

Wind Turbine Performance Data

Turbine Model = FE1048V (408 PMG)
Turbine Blades = 5 (25 deg blade pitch)
Battery Load = 48 V
Startup Wind Speed = 2.0m/s
Charging Initiation Wind Speed = 3.8m/s
Charging Initiation RPM = 380

For battery charging applications we suggest that you use a suitable charge controller to prevent your batteries from becoming overcharged. We highly recommend the Xantrex C60 charge controller. (See our eBay shop for our recommended charge controller or contact us).

When using a charge controller with your wind turbine or battery bank, use a suitable dump load for connection. (See our eBay shop for our recommended dump load or contact us).

* Mechanically furling tail fin for high wind protection
* Unique high-spec Permanent Magnet Generator
* 5 top-grade glass filled nylon turbine blades
* Sealed bearings in mast-mounting shaft
* 60 Amp rated slip-ring prevents cable-twisting
* Aerodynamic profile design
* Patented anti-vibration locking washers
* Rugged and simple, with a minimum of parts and simplicity of design
* Zinc-plated and Stainless Steel with powder-coated and anodised aluminium for optimal corrosion and weather resistance
* Manufactured in the UK

Technical Specifications

* Nominal Power Output - 1kW
* Start-Up Wind Speed - 2m/s
* Cut-In Wind Speed - 3.8m/s
* Charging Initiation RPM - 380
* Rated Wind Speed - 12.5m/s
* Survival Wind Speed - 50m/s
* Rotor Diameter - 1.8m
* Number of Blades - 5
* Generator Type - 3-Phase Perm Magnet (this is rectified to DC inside the turbine, giving a 2-wire DC output)
* Weight - 22Kgs
* Suitable Tower Diameter - 50mm
* Noise: LAeq 35dB @ 5m/s @ 5m behind rotor
* Noise: LAeq 54dB @ 7m/s @ 5m behind rotor
* ROHS compliant

We don’t recommend the installation of any of our turbines in ‘building-mounted’ installations, other than for steel-framed and other industrial buildings. These turbines are tower-top ready (turbine sleeve has a 50mm diameter hole to accept 48.3mm standard scaffold pole).

International Shipping Available

Please contact us for very competitive rates for international delivery.

Brand New, Boxed With 2 Year Warranty